 |
Very high yielding quality winter malting barley with stong end user demand Parentage: (NFC 296-7 x Rifle) x Pearl Status: HGCA Recommended List |
  |  Yield potential
Flagon is the highest yielding, fully approved 2-row winter malting variety in treated and untreated trials, with yields up to 3% higher than Pearl. Flagon also shows consistently low grain nitrogen content, offering the grower more flexibility in meeting market requirements. 
Source: HGCA Winter Barley Recommended List 2009–2010
Source: HGCA Recommended List 2009–2010
Disease resistance Flagon has outstanding all-round disease resistance: all ratings are at 6 or above.
Source: HGCA Winter Barley Recommended List 2009–2010.
On the 1-9 scale high figures indicate that a variety shows the character to a high degree (eg high resistance). Fungicide use Always consult your agronomist and adapt programmes to local conditions. T0 - Needed if there are signs of early disease pressure. T1 - T1 timing is the key for protecting the canopy during the plants' main spring growth period, as during this time competition from disease reduces the development of potential grain sites. The use of Kayak + a triazole or strobilurin based product gives a broad-spectrum of disease control. Triazole should be added in a curative situation or the where the crop is showing high levels of brown rust. T2 - T2 application is to protect green leaf and prolong grain filling as premature senescence caused by disease and abiotic leaf spotting reduces yield and increases loss through screenings and specific weight. Bravo has been demonstrated to have affect against biotic and abiotic leaf spotting, good disease control and prolonged green leaf retention.
Core fungicide programme - T0 - Kayak + morpholine if required
- T1 - Kayak + triazole or strobilurin
- T2 - Amistar Opti + triazole
Note: Amistar Opti is a co-formulation containing azoxystrobin and chlorothalonil (Bravo). Agronomic information Flagon is relatively early to mature and a full PGR programme is recommended due to moderate straw strength.
Source: HGCA Winter Barley Recommended List 2009–2010. () denotes limited data. Growth habit - Autumn: Semi-prostrate
- Spring: Medium
- Tillering ability: Medium
- Maturity: Medium/early
Drilling dates - Suitability for early drilling: Good
- Optimum drilling date: End of September to early October
- Suitability for late drilling (December): Medium
Recommended sowing rate Seed rates are dependent on soil conditions, rotation and time of drilling: the more difficult the environment the higher the seed rate must be to compensate for potential plant loss. The table below shows the suggested number of seeds per square metre that should be planted under good conditions. The table below should always be used in conjunction with the thousand grain weight of the seed to calculate the sowing rate.
 Nitrogen application Most commercial malting barley growers use between 100-120kg/ha with a split dressing. Syngenta Seeds recommends 40kg/ha in mid to late February and the remainder to be applied by the end of March. These figures are for guidance purposes only. You must work with your agronomist when calculating nitrogen rates and timings, taking into consideration end market requirements and the fertility of the field. You should also work within any Defra guidelines/restrictions. PGRs Commercial malting barley growers in 2006 and 2007 controlled lodging easily with a standard programme. On very lush or fertile sites a second PGR at GS37 may be required. Core guidelines - GS31-32 – Moddus 0.2 lt/ha + chlormequat 1.25 lt/ha at onset of stem extension
- GS37 – Moddus 0.3 lt/ha or Ethephon + mepiquat chloride 0.1 lt/ha
Grain quality Flagon has full Institute of Brewing and Distilling (IBD) approval for brewing and an established demand among all end users. Flagon has high hot water extract levels and low beta glucan, providing excellent quality. Flagon is also an inherently low grain nitrogen producer, a critical element in achieving full specification.
Source: HGCA Winter Barley Recommended List 2009–2010. Harvesting Top priority - as with all quality crops it is critical to harvest the crop in the best condition as soon as moisture is correct. As with all malting barleys, the variety should be kept separate to prevent contamination and to maintain the maximum premium from the end product. Storage Management Correct storage of malting barley is a priority to ensure harvest quality remains. Malting barley should be at a moisture of below 14.5% to minimise the risk of moulds and dried in such a way so there is no damage to germination. Grain temperatures and moistures should be regularly checked to ensure quality is maintained and germination levels are kept at 98% plus. If you require any more information about this variety, please contact Syngenta Seeds on 01223 883400 Disclaimer
The information given in these pages is for general guidance only. Whilst every care has been taken to ensure it is accurate, it is out of necessity, of a general nature and variation in growing environment or climate and/or changes to legislation, regulations and best practice can render it inaccurate. Syngenta Seeds Limited cannot accept any liability arising out of or in conjunction with the use of this information. Crop protection products should be used in conjunction with manufacturers’ recommendations. Use pesticides safely – always read the label. Consult your agronomist for the most current advice. |
